KS30 (L)Diamond Drill RigDrill bit diameter: max. 150 mm Core drillings up to Ø 350mm, stand base made of steel or aluminum, robust roller guide ensures precise drilling, easy installation of the drill thanks to a quick-change system. |
 KS30 |
| KS30 | KS30 E | KS30S | KS30 ES | ||
| Length | mm | 950 | |||
| Feed way | mm | 580 | |||
| Drill bit length max. | mm | 560 | |||
| Drill bit diameter max. | mm | 300 – with distance plate 350 | |||
| Inclination | degree | over 45 | |||
| Rig foot | Combined foot | Combined foot | Steel | Steel | |
| Machine fixture | Quick change plate | ||||
| Guidance | Stainless Steel Rail and Rollers | Plastic Rollers | Stainless Steel Rail and Rollers | Plastic Rollers | |
| Weight | kg | 13 | 11,5 | 14,5 | 13,5 |
- Solid, torsion-resistant drill column made of high-tensile aluminium-alloy
- Adjustabel ball bearing supported roller guidance made of stainless steel
- Feed carriage slides absolutely free from backlash
- Quick change plate for fastening the drilling machine
- Combined rig foot, can be fixed with dowels and vacuum or very robust steel base
- High bending and vibration stability together with a very low weight
- Gear rack made of wear resistant steel
- Stop bolt at the carriage to apply the wrench for loosen the tool
- Measuring scale for adjusting the inclination
- Ergonomically designed hand wheel, can be fixed left and right without tools, easy selection of the operating side
- Levels and adjusting screws for precise vertical and horizontal alignment of the rig
- Wheels and two adjustable swing feet
- Vacuum fittings, gasket and water collecting ring as accessory
- Distance plate for a max. drill bit diameter of 350mm as accessory
- Verions KS30 E und KS 30 S available
| KS30 | KS30 E | KS30 S | KS30 ES | |
| Combined rig foot, can be fixed with dowels and vacuum | X | X | ||
| Steel foot | X | X | ||
| Swing feet | X | X | X | |
| Stainless Steel Rail and Rollers | X | X | ||
| Plastic Rollers | X | X | ||
| Wheels | X | X | X | X |
- The drill rig KS 30 is characterized by a wide range of applications. Bore holes with medium diameter can be drilled fast and safe in the entire field of the construction industry
- The combined rig foot with vacuum fixture can be used for special surfaces, e.g. tiles
- Recommended for WEKA diamond core drilling machines type DK26, DK32, SR25 and SR38.
| KS3070 | Vacuum adaptor for KS 30, clp. with seal |
| WR202 | Water collecting ring für KS30 (E,S), cpl. with seal disk, max. drill Ø 200 mm |
| KS30756C | Distance plate for KS30 (E,S), max. drill Ø 350 mm |
| KS30780 | Middle pointer for KS30 (E,S), for SR25-38 |
| KS30780.1 | Middle pointer for KS30 (E,S), for DK2-5 |
