DK08Diamond Core DrillDrilling range: 30-200 mm Powerful core drilling machine, 2-speed gearbox with oil bath lubrication and overload clutch. Motor protection and soft start by Intellitronic. |
 DK08 |
| DK08 | DK0803 | ||
| Nominal power | W | 1800 | 1800 |
| Output power | W | 1200 | 1200 |
| Rated speed | 1/min | 540/1700 | 540/1700 |
| Total length | mm | 450 | 450 |
| Weight without cable | kg | 4,9 | 4,9 |
| Drilling Ø c. | |||
| rig operated (concrete) | mm | 30-150 | 30-150 |
| hand-held (concrete) | mm | 30-80 | 30-80 |
| hand-held (masonry) | mm | 30-200 | 30-200 |
| Tool fixture | G 1/2″ | G 1/2″ + 1 1/4“ | |
| Mounting neck Ø | mm | 60 | 60 |
| Suitable drill rig type | KS13 | KS13 |
- Universal wet diamond core drill with a wide drilling range
- 2-speed-gear with oil bath lubrication and overload clutch
- Motor protection and soft start by means of the Intellitronic
- Levelling assistance – by two integrated levels
- Supplied with a complete tool set in a practical suitcase
- Springy centering spike for a safe and precise start of drilling as accessory
- Wet drilling of through-holes in concrete, masonry and stone for cables, cable trays and pipes
- Wet drilling for setting large-diameter anchors
- Wet drilling in ceilings, floors and walls
- Stitch drilling of through-holes in plumbing, and air conditioning installations
- Ventilation openings
| AS 12.200 | Centering Spike - Diamond core bits 1 1/4", length 200 mm |
| AS 12.300 | Centering Spike - Diamond core bits 1 1/4", length 300 mm |
| AS 12.400 | Centering Spike - Diamond core bits 1 1/4", length 400 mm |
| WR 10.82 | Water Collecting Ring with Drill Guide, tool diameter 10 - 80 mm, tool length 200 mm |
| WR 10.83 | Water Collecting Ring as WR10.2, tool length 300 mm |
